Skip to content
ihateDesmos

Distance, velocity and acceleration graphs

6 min read · Updated 6 November 2026

Motion graphs show how an object moves over time. The key to reading them: the slope of a graph gives the next quantity down the chain, from distance to velocity to acceleration, and the area under a graph gives the one back up.

How the three graphs connect

GraphSlope tells youArea under it tells you
Distance (or position) against timeVelocityNot usually useful
Velocity against timeAccelerationDisplacement
Acceleration against timeJerk, which is rarely usedChange in velocity

Distance-time graphs

  • A straight rising line means constant speed. A steeper line means faster.
  • A flat line means the object has stopped.
  • A curve getting steeper means speeding up.
  • A curve getting flatter means slowing down.

Speed is the slope: a line that rises 60 m in 12 s means a speed of 60 ÷ 12 = 5 m/s.

246810121020300
Open in calculator
A journey: walking at 5 m/s for 4 s (blue), stopping for 3 s (red), and then moving on at 2.5 m/s (green).

Velocity-time graphs

  • A flat line means constant velocity, with no acceleration.
  • A rising line means constant acceleration; a falling line means slowing down.
  • Below the x-axis means moving backward.

The slope is the acceleration, and the area underneath is the displacement. In the graph below, a car speeds up from 0 to 20 m/s in 4 s, so its acceleration is 20 ÷ 4 = 5 m/s². It covers ½ × 4 × 20 = 40 m while speeding up, then 20 × 6 = 120 m at a steady speed.

246810121410200
Open in calculator
A car speeds up, cruises and then brakes. The total distance is the area under the whole graph.

Acceleration-time graphs

A flat line means constant acceleration. For an object in free fall, ignoring air resistance, the acceleration is a flat line at about −9.8 m/s². The area under the graph between two times is the change in velocity: 3 m/s² for 4 s adds 12 m/s.

The calculus behind it

Velocity is the derivative of position, and acceleration is the derivative of velocity. Going the other way, position is the integral of velocity.

A ball thrown upward at 20 m/s has height h = 20t − 4.9t². Differentiating gives its velocity, v = 20 − 9.8t, and again gives its acceleration, a = −9.8. The ball reaches the top where v = 0, at t ≈ 2.04 s.

1234−20200
Open in calculator
A thrown ball: height in blue, velocity in red and acceleration in green. Velocity crosses zero exactly when the height peaks.

Common mistakes

  • Reading a velocity graph as a path. A falling line doesn’t mean going downhill. It means slowing down.
  • Confusing a flat velocity line with being stopped. Stopped means a velocity of 0. A flat line at 20 means a steady 20 m/s.
  • Forgetting that areas below the axis count as negative for displacement.

Frequently asked questions

What does the slope of a distance-time graph represent?
Speed. A steeper slope means a faster speed, and a flat line means the object has stopped.
What does the area under a velocity-time graph represent?
Displacement: how far the object has moved. Area below the axis counts as movement backward.
What does a horizontal line mean on a velocity-time graph?
Constant velocity, so the acceleration is zero.
How do you find acceleration from a graph?
It is the slope of the velocity-time graph: the change in velocity divided by the change in time.
What is the difference between speed and velocity?
Velocity has a direction, so it can be negative. Speed is its size, and is never negative.

Keep going

Try it in the calculator

Every figure on this page opens in ihateDesmos, where you can drag sliders and watch the graph respond.

Open the calculator